Océ cm3522/cm2522 8-12User mode settings 8AddressEnter the fax number of the destination using up to 38 digits. Enter the number using the keypad.- In order to dial a number without fail to send a fax from an extension number to the outside line whenPBX connection setting is enabled, touch [Pause] after dialing the outside line such as "0". On thescreen, "P" is displayed.- When the PBX connection setting is enabled, [Outside] is displayed. Selecting this key displays [E-].Line SettingsSpecify transmission settings for the line.Item DescriptionOverseas TX Specifies a slow transmission speed to send a Fax to an area in bad commu-nication.ECM OFF Cancels ECM mode and cuts communication time to send data.The ECM mode is an error request repeat method communication defined byITU-T (International Telecommunication Union). As faxes equipped with theECM mode communicate by checking if the sent data has an error, they canprevent image blurring by the noise on the phone line.V. 34 OFF V. 34 is a communication mode used for Fax communication of super G3.There are cases when the communication is not possible in super G3 modedepending on the telephone line conditions when the recipient’s machine orthis machine is connected to the line via a private branch exchange.It is recommended that you set V. 34 to off before sending a Fax. This ma-chine automatically returns to V. 34 mode when it completes transmission.Check Dest. & Send A Fax is sent only after a comparison of the specified Fax number with theFax number information (CSI) for the recipient’s machine indicates a match.This prevents misdirected transmissions since a transmission error occurs ifthe numbers do not match.Select Line Select [Line 1] or [Line 2] to send a Fax if the fax multi line is installed. Specifya line for transmission.
