Océ cm3522/cm2522 3-3Registration of basic information 3Specifying the E-Mail address of the machineTo send scanned data as an E-Mail message or to use the Internet fax function, register the E-Mail addresson the machine beforehand. This E-Mail address is used when sending and receiving data. Generally, it isrecommended that the E-Mail address registered for the administrator be used.If the E-Mail address registered for the administrator is not specified, the E-Mail address of the sender mustbe entered for each Scan to E-Mail operation. Scan to E-Mail operations are not possible without addressentry.!DetailWhen user authentication is enabled, the E-Mail address specified for each user is used as the sender’saddress.For details on specifying the E-Mail address of this machine, refer to the User’s Guide [NetworkAdministrator].3.1.3 Connecting a modular cableWhen sending/receiving faxes via a phone line, modular cable connection is needed. To use the G3 faxfunction, an optional fax kit must be installed. Also, to use two lines, the optional fax multi line must beinstalled.Connect a modular cable connected to the phone line to a specified connector. For the connector locationfor cable connection, refer to the User’s Guide [Copy Operations].
