cm6520 x-31Clearing paper misfeedsIf a paper misfeed occurs, a screen like the one shown below appears with the location of the misfeedindicated. To clear the misfeed, check the location indicated in the screen, and then perform the necessaryoperation.A flashing “o” indicates the location of the paper misfeed.A lit “o” indicates areas where paper may have been misfed and that should be checked.Paper misfeed locationsFor details on misfeeds 1 through 15, refer to page x-32 of this manual and perform the appropriateoperation.For details on misfeed 16 to 18 (finisher 9834), refer to page x-33 of this manual and perform the appropriateoperation.For details on misfeed 16 to 18 (finisher 9833), refer to page x-34 of this manual and perform the appropriateoperation.For details on misfeed 19 (post inserter 9835), refer to page x-35 of this manual and perform the appropriateoperation.2 NoteFor details on the procedures for clearing paper misfeeds, refer to chapter 4, "Troubleshooting", of theUser’s Guide [Copy Operations].2 1 3 45678911101518161413121917
