1 Overview1-8 cm35211.3 Setting up the systemIn order to use this printing system, it must first be set up.Setup consists of connecting this machine to a computer and installing theprinter driver onto the computer being used.To set up the printing systemSetup of the printing system as described below.1 Connect this machine to a computer. (Refer to “Compatible interfaces”on page 1-6.)2 Install the printer driver. (Refer to “Installing the printer driver” onpage 2-1.)3 When using a network connection, set up the network. (Refer to “Set-ting up network printing” on page 3-1.)4 Check the setup by printing a test page. (Refer to “Test printing” onpage 4-4.)5 Install the screen fonts.– The User Software CD-ROM and the PostScript Printer Driver CD-ROM contain the Latin TrueType fonts as screen fonts.– Install the screen fonts after adding the operating system standardfonts.– For details, refer to Help of the operating system.– The CD-ROM “Screenfont” or “Screenfonts” folder contains thescreen fonts.– The Macintosh fonts are compressed. Install the fonts after decom-pressing them.Installation of the printer driver may differ depending on the connectionmethod used with this machine in addition to the operating system of thecomputer and the type of printer driver being used.!DetailFor details on connecting this machine to a computer, refer to “Compat-ible interfaces” on page 1-6.
