Installing the printer driver 2cm3521 2-1115 Remove the CD-ROM from the CD-ROM drive.This completes the printer driver installation.Installing the printer driver using Plug and PlayFor Windows 98SE1 After using a parallel cable or a USB cable to connect this machine toa computer, turn on the computer.– Do not disconnect or connect the cable while the computer is start-ing up.2 Insert the Windows printer driver CD-ROM into the computer’s CD-ROM drive.– PCL Driver: User Software CD-ROM– PostScript Driver: PostScript Printer Driver CD-ROM3 Turn the main power of this machine on.The Add New Hardware Wizard starts up.4 Click the [Next] button.5 Select “Search for the best driver for your device (Recommended)”,and then click the [Next] button.6 Select “Specify a location”, and then click the [Browse] button.7 Specify the folder on the CD-ROM that contains the printer driver forthe operating system that you are using, and then click the [OK] button.– PCL Driver: User Software CD-ROM “Driver\35C-3” folder– PostScript PPD driver: PostScript Printer Driver CD-ROM“Driver\PS-PPD” folder8 Click the [Next] button, and then follow the on-screen instructions.If using a parallel connection, proceed to step 10.9 The Add New Hardware Wizard dialog box appears again. Repeatsteps 4 through 8.10 When installation is complete, make sure that the icon of the installedprinter appears in the Printers window.11 Remove the CD-ROM from the CD-ROM drive.This completes the printer driver installation.
