Oce em3521 Quick Manual

Contents

Oce em3521 Quick Manual Manual pdf 86 page image

Troubleshooting 6cm3521 6-36.2 Unable to specify desired settings or unable to printas specifiedPerform these troubleshooting procedures if you cannot specify the desiredsettings in the printer driver, or if the print results do not represent the set-tings that have been specified.2 NoteSome of the printer driver functions cannot be combined with other func-tions.Symptom Probable cause ActionA printer driver settingcannot be selected.Some functions cannot be com-bined.Do not try to select settings thatare not available.The “Conflicts” mes-sage with “Unable toSelect” or “FunctionCanceled” appears.An incorrect combination of func-tions has been specified.Check the settings and specifythe functions correctly.Printing is not per-formed as specified.Incorrect settings are specified. Check each setting in the printerdriver.A combination of functions, al-though possible in the printer driv-er, is not possible with thismachine.The paper size, orientation, andother settings specified in the ap-plication have priority over thosespecified in the printer driver.Enter the correct settings in theapplication.The watermark cannotbe printed.The watermark is not correctlyset.Check the watermark settings.The watermark density is set to alevel that is too low.Check the density settings.Watermarks cannot be printed ingraphics applications.No watermark can be printed inthis case.The staple functioncannot be specified.Stapling is not possible if “PaperType” is set to “Thick” or “Trans-parency”.Check each setting in the printerdriver.The staple function requires op-tional finisher.Install the required optional finish-er and enable it using the printerdriver.Stapling cannot beperformed.If are a large number of pages tobe printed, stapling cannot beperformed.Change the number of pages tobe printed.Stapling is not possible if the doc-ument contains pages of differentsizes.Check the document.