Oce im4511 Operation Manual

Also see for im3511: Programming Date & Time Facsimile operation manual Operation manual Operating manual Operator's guide

Oce im4511 Operation Manual Manual pdf 49 page image

6-5DESCRIPTION OF SETTING PROGRAMSThe key operator programs related to the printer function are explained here.Printer settingsDefault settingsThese programs are used to adjust the settings ofvarious printer functions.Prohibit notice page printingThis program is used to disable notice page printing.Turn on this program when you do not want themachine to print the notice page explained in "NOTICEPAGE PRINTING" on page 8-3.Normally this program is set to not print a notice page.Print density levelThis program is used to adjust the lightness ordarkness of prints.Five levels are provided for density adjustment. Theseare represented by numbers displayed on the touchpanel. Among the displayed numbers, a smaller valueindicates lighter density and a larger value indicates adarker density.Prohibit test page printingThis program is used to disable test page printing.When the program is turned on, the PRINTER TESTPAGE in the custom settings cannot be printed. (Seepage 2-15 of "Copying operation manual".)A4/letter size auto changeIf this program is set, and printing onto A4 size paper isselected but not available, the printer will automaticallysubstitute 8-1/2" x 11" size paper in place of A4 paperif 8-1/2" x 11" paper is available.* A4 paper cannot be automatically selected in place of8-1/2" x 11".Print hold setting*These programs are used to disable or enable the printhold job function that operates when print functionssuch as "Hold Only", "Hold After Print", or "SamplePrint" are executed from a computer. The programsalso enable the key operator to delete a print hold jobin the machine for a user when the user has forgottenthe password or is otherwise unable to delete the job.When "DISABLING OF PRINT HOLD FUNCTION" isselected, the print hold job function is disabled and the"DELETE ALL HOLD DATA" key does not appear inthe base screen of print mode.However, when print hold jobs are stored in themachine, this program cannot be enabled until all of theprint hold jobs have been deleted. The program isnormally disabled (the print hold function is enabled).When "DELETE THE HOLD DATA BY ENTERINGKEY OPERATOR CODE INSTEAD OF PASSCODE"is selected, the key operator can delete print hold jobsfor users.Note, however, that the key operator cannot print thejobs.* This function can be used on models that do not havea hard disk drive installed.NOTEWhen A4 size is specified for a document attached toan E-mail that has been transmitted from a foreigncountry and A4 size paper is not installed in theprinter, printing cannot be done without operatorintervention. If this program is set, printing will beexecuted without intervention if a paper tray isloaded with 8-1/2" x 11" paper.