Oce im4511 Operation Manual

Also see for im3511: Programming Date & Time Facsimile operation manual Operation manual Operating manual Operator's guide

Oce im4511 Operation Manual Manual pdf 5 page image

1-2SETTING THE PRINTER DRIVERThis section describes the method of changing the printer driver settings from your computer. If you have not yetinstalled the printer driver, read the accompanying "Software setup guide (for PCL printer driver)" and install theprinter driver from the CD-ROM.Printer driver settings in Windows(selecting and setting print conditions)Change the settings using the printer properties. Windows 95/98/MeThe procedure for adjusting the settings inWindows Me is explained in the following.1 On the [Start] menu, select [Settings] andthen [Printers].2 Right-click the installed printer driver andselect [Properties] in the pop-up menu.Click the [Setup] tab in the printer driverproperties.The screen shows the example of selectingImagistics im4511 PCL6.3 Set each item.For setting items, see the printer driver help. Forinformation on viewing Help, see the followingpage 1-3. An example of always using thedocument filing function is explained on page 1-3.4 Click the [OK] button. Windows NT4.0 / 2000 / XP / Server2003The procedure for adjusting the settings inWindows XP is explained in the following.1 Select [Printers and Faxes] from the [Start]menu.2 Right-click the installed printer driver andselect [Printing Preferences].The screen shows the example of selectingImagistics im4511 PCL6.3 Set each item.For setting items, see the printer driver help. Forinformation on viewing Help, see the followingpage 1-3. An example of always using thedocument filing function is explained on page 1-3.4 Click the [OK] button.NOTETo configure settings for installed peripheral devices such as a saddle stitch finisher, finisher, and large capacitytray, right-click the printer driver, select [Properties], and select the [Configuration] tab. (In Windows 95/98/Me,select [Properties] and then the [Configuration] tab in the [Setup] tab.) If the machine is being used as a networkprinter, click the [Auto Configuration] button in the [Configuration] tab to automatically set the peripheral deviceconfiguration. To display the latest tray information (paper size, paper type, and paper remaining), click the [TrayStatus] button in the [Paper] tab.When a hard disk drive is added on to a model that does not originally have a hard disk drive, the peripheral deviceconfiguration must be updated. After adding on the hard disk drive, click the [Auto Configuration] button on the[Configuration] tab to update the peripheral device configuration.