7534. SETTING SCAN FUNCTIONSYou can change the initial setting (default setting) of scan job.The [SCAN] button in the [USER] menu will be available only when the Scanner Kit is installed, or whenthe Printer/Scanner Kit is installed.1 Press the [USER FUNCTIONS] button on the control panel to enter theUser Functions menu.2 Press the [USER] button, and then press the [SCAN] button on thetouch panel.• The SCAN screen is displayed.3 Specify the following items as you require.• In the “SINGLE/2-SIDE SCAN” option, press the desired mode button.[SINGLE] — Press this to set single page scan as default scan mode.[BOOK] — Press this to set book scan mode as default scan mode. This enables to scan both side of origi-nals in the same direction.[TABLET] — Press this to set tablet scan mode as default scan mode. This enables to scan front page in thegeneral direction, and scan back page rotated 180 degree.• In the “ROTATION” option, press the desired mode button.[0 degree] — Press this not to rotate the scanned image as default.[90 degree right] — Press this to rotate the scanned image 90 degree on the right as default.[180 degree] — Press this to rotate the scanned image 180 degree as default.[90 degree left] — Press this to rotate the scanned image 90 degrees on the left as default.• In the “ORIGINAL MODE” option, press the desired mode button applied for scans.• In the “RESOLUTION” option, press the desired mode button applied for scans.
