112 Set Up the Machine6 Gently insert the paper drawer as far as it willgo.Connect the Power Cord and Turn ON the MachineBe careful not to get your fingers caught.In the same manner, load the paper into the optionalpaper drawer. For attaching the optional paper drawer,see the instruction sheet that comes with the optionalpaper drawer.For details on loading paper in the stack bypass, seeChapter 2, “Originals and Print Media,” in the BasicOperation Guide.––1 Connect the power cord to the rear socket onthe back side of the machine and to the walloutlet, and press the [I] side of the main powerswitch (A) to ON.Do not connect the machine and the computer with aUSB cable at this time. Connect the machine and thecomputer with a USB cable only during the softwareinstallation procedure.If you want to use the optional paper drawer, attach theCassette Feeding Module-N2 to the machine beforeturning ON the machine. (For instructions on how toattach the Cassette Feeding Module-N2, see theinstruction sheet that comes with the Cassette FeedingModule-N2.)––2 The machine enters the standby mode.Without optional drawer0 1A T E X T1 0 0 % L T RWith optional drawer0 1A T E X T1 0 0 % A U T OThe display returns to the standby mode:The machine may enter the standby mode (Auto Clear function) while you aresetting it up. Make the setting again from the main menu.The display turned off:The machine may enter the sleep mode while you are setting it up. Press[Power] to turn the machine back ON and continue the setup. is displayed:Make sure that the front or left cover is closed properly.(See “Install Toner Cartridge,” on p. 6, or “Install Drum Unit,” on p. 8.) is displayed:Make sure that the toner cartridge is installed properly.(See “Install Toner Cartridge,” on p. 6.) is displayed:Make sure that the drum unit is installed properly.(See “Install Drum Unit,” on p. 8.) is displayed:Make sure that paper is loaded in the paper drawer properly.(See “Set Up Paper Drawer and Load Paper,” on p. 9.)●●●●●●●●