204A category 5 or greater twisted pair LAN cable is compatible with the machine. Connect one end to the10Base-T/100Base-TX port on the back of the machine and the other end to a network router or a hub.Set Up Network ConnectionThis section describes the network connection.If you are using the imageRUNNER 1025 without optional network board installed, skip the procedure described in this section.Connect the LAN Cable1 Connect a LAN cable that is compatible with the LAN connector of this machine.Compatible LAN CablesThe machine does not come with a LAN cable.You can use the imageRUNNER 1025 in a network environment if the optional network board is installed.If you use the machine as a local printer, connect the machine directly to a computer using a USB cable. (See “USB Connection,” onp. 31.)–––