Step by StepConducting calls – the basic functions2Activating/deactivating the handseta Press the On-hook key until the activation or deactivation is con-firmed by a crescendo tone sequence.PINIf the default PIN has not been changed (0000), the handset is readyfor operation as soon as it is switched on. If a PIN was set, it must beentered before the handset can be operated.o Enter the PIN[ Confirm your entry. The handset is ready to use.Displaying the connection qualityThe strength of the incoming signal is displayed by the "receive fieldstrength" icon in on or message status:The radio range is different indoors and outdoors (Æ page 125).Please consult your system administrator in the event of range prob-lems.Charging the batteriesYou may only use the charging shell provided for the handset.The handset charges when sitting in the charging shell, even whendeactivated. If the handset is active, the charging status display flash-es on the display.If the handset deactivates because the battery pack is flat, it automat-ically reactivates and is ready for operation as soon as you place it inthe charging shell. The charging operation starts. If a PIN was set, itmust be entered first to allow charging to start.Please enterPIN:| flashing, no receptionÒ Low receive field strengthÑ 50% receive field strengthi 75% receive field strengthÐ 100% receive field strength
