Executive Series 2426 Printer Family User’s GuideWindows Me/98/95 Operation • 390Downloading the print file to use as an overlayIn the previous topic, you created a print (PRN) file on your PC's harddisk. This topic explains how to use the Storage Device Manager todownload this file to the printer.The Storage Device Manager software is included with the originalsoftware CDs that were supplied with your printer.1. Launch Storage Device Manager. Allow the program to discover(locate) the printer.2. Click Project, then New Project.3. From the Project menu, select Add File to Project.4. Select the PRN file(s) that you created earlier.PCL: This automatically generates a BIN file.PostScript: This automatically generates a PostScript hst file.5. Note the name that the file is assigned in the Storage DeviceManager. Names are case sensitive.6. Make sure the printer being used is highlighted in the lowerwindow of the Storage Device Manager.Important!The BIN file is automatically assigned an ID number.To change the ID number• double-click the number• enter a new one in the ID field.NOTEThe assigned file name is very important! You must use thisID number or name when creating overlays in the printerdriver. You should change the ID number or name from thedefault value. Note the new name for later use.
