ES 3037/3037e Windows NT 4.0 Operation • 391Once someone has set up all the necessary overlay files on theprinter, other users only have to switch on the required settings in theprinter driver to use the overlays.Creating documents to use as overlaysAn overlay can be created in any software application that canhandle logos, letterheads, forms, etc. and can print to a file.PCL DriverTo create a print (PRN) file:1. With the file to be stored as an overlay open in your applicationprogram, choose File then Print.2. Ensure that the "Print To File" option is switched on in yourapplication’s Print dialog box.3. Depending on the application, you may need to select your OKIprinter model, and then click Properties… This should open theprinter driver settings.4. Choose all of the printer driver settings with which you wouldlike your overlay to print.NOTE• The internal hard disk must be installed in the printer toallow for spooling of the print job before final printing.• If the hard disk memory is insufficient for the spooleddata, DISK FULL is displayed and only one copy printed.• If the software application being used has a collate printoption, this must be turned OFF for overlay to operatecorrectly.• An overlay may consist of more than one component file.ImportantPlease ensure that you are using the Oki PCL driver to do this.
