ES 3037/3037e Windows Troubleshooting • 422TroubleshootingLCD MESSAGESThe liquid crystal display (LCD) on the control panel indicates theprinter status and if there is a problem with the printer. Status anderror messages are listed below together with an explanation ofwhat each message means:LCD Message Meaning***** DRUM NEAR LIFE An image drum is nearing the end of its life.(***** indicates color)***** EMPTY Warning that Tray ***** is empty. MP Tray is Tray 0.***** NEAR END The paper in the selected ***** is nearly finished.(***** indicates paper tray).***** TONER LOW Toner is low (***** indicates color).***** TONER SENSORERRORError with the toner sensor (***** indicates color).Call for service.BELT UNIT MISSING Transfer belt unit is missing.CANCELLING JOB Cancelling the current job.CENTRO I/F ERROR Centronics interface error (parallel interface).CHANGE ***** IMAGE DRUM Change the image drum (***** indicates color).CHANGE BELT UNIT Change the transfer belt.CHANGE FUSER UNIT Change the fuser unit.CHANGE PAPER TO ***** Paper must be changed to correct paper size and/ormedia type (***** indicates size or media type).CHECK ***** Check Tray ***** for paper jam. MP tray is Tray 0.CHECK BELT UNIT Check the transfer belt for paper jam, correctinstallation, etc.CHECK DUPLEX Check the duplex unit for paper jam, correctinstallation, etc.CHECK FUSER UNIT Check the fuser unit for paper jam, correct installation,etc.CHECK IMAGE DRUM Check the image drum for correct installation, etc.Color will be indicated.COLLATE FAIL Collating of multiple copies has failed.COLOR ADJUSTING Adjusting head so that colors do not shift on to eachother.COLOR BALANCE ADJUST Adjust the color balance.
