ES 3037/3037e Setting up • 71Parallel menuThe defaults are bold.Item Value DescriptionPARALLEL Enable; Disable Selects parallel (Centronics) interface.BI-DIRECTION Enable; Disable Selects bi-directional communication.ECP Enable; Disable Selects ECP mode.ACK WIDTH NARROW; MEDIUM;WIDE)Sets ACK width for compatiblereception:Narrow = 0.5 μSMedium = 1.0 μSWide = 3.0 μSACK/BUSYTIMINGACK-in-Busy;ACK-while-BusySets output order for ACK and BUSYduring reception.ACK IN BUSY: BUSY=LOW to theend of the ACK pulseACK WHILE BUSY: BUSY=LOW tothe centre of the ACK pulse.I-PRIME 3 micro-sec; 50 micro-sec; DisableSets or disables the i-Prime signalOFFLINERECEIVEEnable; Disable When set to Enable, this functionmaintains reception without changingthe interface signal, even though analarm occurs.The interface stays open even if theON LINE button is pressed.The interface issues a BUSY signalonly when the receive buffer is full orwhen a service call occurs.USB menuThe default settings are bold.Item Value DescriptionUSB Enable; Disable Selects USB interface.SOFT RESET Enable; Disable Selects use of soft reset command.OFFLINERECEIVEEnable; Disable When set to Enable, this functionmaintains reception withoutchanging the interface signal, even ifan alarm occurs. The interface staysopen even if the ON LINE button ispressed. The interface issues aBUSY signal only when the receivebuffer is full or when a service calloccurs.
