B2500- 9 -2 - InstallationPackaging contentsThe packaging contains the items listed below:Multifunction device1 toner cartridge1 installation guide, 1 PC installation CD ROM and 1user guide CD ROM1 power cord2 booklets (safety and warranty)device installation1 Unpack the device.2 Install the device respecting the security noticesstated at the beginning of this booklet.3 Remove all stickers from the machine.4 Remove the plastic protection film from the screen.Loading paperLoading paper in the main unit tray andsupplementary paper feed(1) Paper to be used must be inserted with the face down,and abutting the side fence and back fence. Notabutting the paper, this may cause feed failure,skewing, and paper jams.(2) Amount of loaded paper must not exceed the loadingmark. If the loading mark is exceeded, this may causefeed failure, skewing, and paper jams.(3) Adding paper to the pile may cause double feeding,and should be avoided.(4) When withdrawing the cassette from the main unit,always support it with both hands.Pulling the cassette out quickly with one hand, maylead to it being unable to be supported, and beingdropped.Handling of paper(1) Curling must be corrected before printing.(2) Curls must not exceed 10 mm.(3) Care must be taken with storage to prevent feed faultsand image defects due to leaving the paper inconditions of high humidity.Adding paper to the pile, or splitting the pile may causefeeding problems, and must be avoided.Humidity control(1) Paper which has become damp, or paper which hasbeen left unused for a very long time.(2) After opening the paper, it must be kept in a plasticbag.(3) Paper with waved ends, paper which is creased, paperwith crumples, and any other non-normal paper mustnot be used.Handling the unitOperator shocksDuring printing, shocks must not be applied to the paperfeed cassette, tray, cover, and so on.Moving the unitWhen moving the unit on a desk, it must be lifted, and notdragged.