Oki B2500 User Manual

Also see for B2500: User guide User guide Specifications

Oki B2500 User Manual Manual pdf 18 page image

B2500- 14 -3 - CopyAnalysis origin setupIf you want, you can change the origin of the scanner.By entering new values for X and Y in mm (X < 210 andY < 286), you move the analysed area as shown on thediagram below. 843 - ADVANCED FCT/COPY/ORIGIN1 Select the X and Y coordinates with the buttons or .2 Setup the desired coordinates with the digitalkeyboard or the buttons and , confirm yourchoice by pressing on the OK button.Contrast setupThe CONTRAST parameter allows to choose thephotocopy contrast. 844 - ADVANCED FCT/COPY/CONTRAST1 Setup the desired level of contrast with the buttons and , confirm by pressing the OK button.2 You can also directly setup the desired contrastwith the button, press several times on thisbutton until the desired setup without using theMenu 845.3 Quit this menu by pressing the button.Brightness setupThe BRIGHTNESS parameter allows to lighten or darkenyour original document. 845 - ADVANCED FCT/COPY/LUMINOSITY1 Setup the desired brightness with the buttons and .2 Confirm your choice by pressing the OK button.3 Quit this menu by pressing the button.Paper type setup 851 - ADVANCED FCT/SCAN. & PRINT/PAPERTYPE1 Select the paper NORMAL (60-90 g/m²) orTHICK (90-162 g/m²) that you use with the buttons and .2 Confirm your setup by pressing the OK button.3 Quit this menu by pressing the button.Paper tray selection 852 - ADVANCED FCT/SCAN. & PRINT/TRAYPAPER1 Select the paper tray that you use AUTOMATIC orMANUAL with the buttons and .2 Confirm by pressing the OK button.3 Quit this menu by pressing the button.Analysis margins setupIf you want to, you can offset the lateral margins of thedocument to the left or right during the analysis with yourflat-bed scanner. 853 - ADVANCED FCT/SCAN. & PRINT/FLATBED MARG1 Setup the left / right margins offsets (by 0.5 mmsteps) with the buttons and .2 Confirm by pressing the OK button.3 Quit this menu by pressing the button.Left and right printing margins setupIf you want to, you can offset the lateral margins of thedocument to the left or right during printing. 854 - ADVANCED FCT/SCAN. & PRINT/PRINTER MARG1 Setup the left / right margins offsets (by 0.5 mmsteps) with the buttons and .2 Confirm by pressing the OK button.3 Quit this menu by pressing the button.Top and bottom printing margins setupIf you want to, you can offset the lateral margins of thedocument towards the top or the bottom during printing. 855 - ADVANCED FCT/SCAN. & PRINT/TOPPRINT.1 Setup the top / bottom margins offsets (by 0.5 mmsteps) with the buttons and .2 Confirm by pressing the OK button.3 Quit this menu by pressing the button.yDEBUT FEUILLEFIN FEUILLExAnalysed areaBEGIN. OF SHEETEND OF SHEET