43984801TH Rev.1 39 /Oki Data CONFIDENTIAL 3. Parts replacement3.3.2 Roller-Transfer(1) As the power switch shut off, unplug the AC power cord from the inlet of main unit.(2) Open the Stack-Cover –Assy(3) Remove latches in the 2 places of Gear-TR ③ and Bearing-TR ❶ on the conversing side. (Do not addany unnecessary pressure while removing the latch.)(4) Slightly slide the Roller-transfer ❷ to the right side and remove the post on the top of gear from thecontact of Frame-Assy-Lower. Remove the latches on the 2 places of Gearing-TR ❶ of Gear.(5) Hold the Bearing-TR ❶ on the both side, and then lift up the Roller-Transfer ❷ . (At this moment, Gear-TR ③ is also removed.)(6) Installing is performed by the inverse procedure with removing.(Note on removing / installing)1. Beware of not to touch the DC motor inattentively (Do not rotate motor).2. While installing, pay attention to the up-and-down direction of Bearing-TR ❶．3. Operating carefully, not to touch Roller-Transfer ❷ surface.Stacker-Cover-AssyLatch
