43984801TH Rev.1 60 /Oki Data CONFIDENTIAL 3. Parts replacement3.3.21 Lever-In-Sensor(1) Open Rear-Cover-Assy.(2) Open Stacker-Cover-Assy.(3) Remove Frame-Assy-Lower. (Refer to 3.3.16)(4) Remove the 2 Lever-In-Sensor (Entrance and Paper). Press the Clamp of ❶ , press Lever-In-Sensor ①as up direction and then remove them. While remove Lever-In-Sensor ❶ , beware of not to loss or breakSpring-Sensor-In ❷ , Spring-Write-Sensor ❸ .(5) Installing is performed by the inverse procedure with removing.(Note on removing / installing)1. Beware of not to touch the DC motor inattentively (Do not rotate motor).(Paper)(Entrance)Clamp
