43984801TH Rev.1 59 /Oki Data CONFIDENTIAL 3. Parts replacement3.3.20 Roller-Resist(1) Open Rear-Cover-Assy.(2) Open Stacker-Cover-Assy.(3) Remove Frame-Assy-Lower. (Refer to 3.3.16)(4) Remove Plate-Bracket-Motor. (Refer to 3.3.18)(5) Remove the E ring ① . Remove the Gear-Assy-Clutch ❷ , Spacer-Clutch ③ and Bearing-R ❹ .(6) Remove the lock of Gear-Resist ⑤ . Remove Gear-Resist ⑤ , Bearing-Resist-Assy ❻．(7) Lift up the left side of Roller-Resist-Assy ⑦ and remove it at the arrow direction.(8) Remove the lock of Gear-Pressure ⑧ . Remove Gear-Pressure ⑧ from Roller-Pressure ⑨．(9) Remove Plate-Contact-PA ⑪ and Holder-Resist from Roller-Resist ❿ .Remove Holder-Resist ⑬ .(10) Installing is performed by the inverse procedure with removing.(Note on removing / installing)1. Beware of not to touch the DC motor inattentively (Do not rotate motor).
