8 - EnglishProtective Gloves and/or Eye Protection: Notnormally required. For large spills, use rubber glovesand safety goggles during cleanup .Engineering ControlsVentilation: Outside of normal ventilation, notnormally required.Other Protective Equipment and/or HygienicPractices: None.Spill CleanupSmall Spills1. Remove sources of ignition.2. Carefully clean up the spill with a wet cloth,avoiding inhalation of fine dust .Large Spills1. Remove sources of ignition and keep unnecessaryand unprotected personnel away from area.2. Wear protective gear: respirator, rubber gloves,safety goggles.3. Vacuum the spill, then wipe up remainder with awet cloth .Waste Disposal• Prevent release of material into natural waters andsewers.• Follow appropriate federal, state and localregulations .• Passed to a licensed waste contractor.PrecautionsPrecautions for Handling or Storage: Protect fromthe sun. Store in a cool room, under 104°F (40°C).Keep out of reach of children.Other Precautions: None.Shipping InformationSpecial Shipping Information: Non hazardous.Handle container carefully to avoid shock. Do notdrop. Keep dry.UN Number: None.Hazards Class: None.User’s ResponsibilityThis bulletin cannot cover all possible situations which theuser may experience when using this product. Each aspectof your operation must be examined in regard to if, orwhere, additional precautions may be necessary. All healthand safety information contained in this bulletin must beprovided to your employees or customers. It is yourresponsibility to use this information to developappropriate work practice guidelines and employeeinstructional programs for your operation.Preparation Date of MSDSDate: March 15, 2010.Prepared by:Oki Data Americas, IncEngineering Services Department.2000 Bishops Gate Blvd.Mt. Laurel, NJ 08054-4620Tel: (856) 235-2600Fax: (856) 222-5320http://www.okiprintingsolutions.commy.okidata.com