Oki B4200 Installation Instructions Manual

Also see for B4300n: Configuration guide User manual Instructions Installation instructions Setup guide

Contents

Oki B4200 Installation Instructions Manual Manual pdf 1 page image

© 2003 Oki Data Americas, Inc. 58366301Install the Tray1. Unpack the tray and remove theshipping materials.2. Turn off the printer and unplug thepower cord.3. Remove the interface cable.4. Note the location of the pins (1),connector (2) and tray opening (3).5. Pull down the printer’s manualfeed tray.6. Lower the printer onto the auxiliarytray, aligning the holes/plug on thebottom of the printer on the pins/connector on the tray. You shouldfeel the printer seating and lockingin place.7. Attach the connection cable.8. Reattach the interface cable.9. Plug in the power cord and turn onthe printer.10.Verify installationB4300:a. Press the Menu button one ormore times until INFO. MENUappears on the display.b. Press SELECT twice.The MenuMap prints.B4200:a. Press the Control Button to takethe printer off-line.b. Press and hold down the controlbutton for at least 2 seconds, butless than 5 seconds. TheMenuMap prints.11. Look for TRAY2 on the first pageof the MenuMap under theMEDIA MENU listing. If it isn’tthere, check to be sure that theconnection between the printerand Tray 2 is secure, then reprintand recheck the MenuMap.12. Check the MEDIA MENUsettings shown on the MenuMapand make any needed changes for• TRAY2 PAPERSIZE• TRAY2 MEDIATYPE• TRAY2 MEDIAWEIGHTto match the print media you willnormally use in Tray 2. (If you needhelp with this, see “OperatorPanels” in your on-line User’sGuide.Load Paper1. Pull out the tray.2. Position the paper guides in thetray.3. Fan the paper.B4200/B4300 2 nd Paper TrayOki PN-40834406 - 500 Sheet Second Paper TrayInstallation Instructions(continued on back)

/ 2

Related manuals for Oki B4300n