43502101TH Rev.1 127 /Oki Data CONFIDENTIALIf the Menu key ispressed menu change. Press the Value+ or Value- key.Press the Value+or Value- key.+3+2+10 *- 1- 2- 3TR1 CRNT0 *Changes TR1_1’s current for reading the TR resistancevalue.Press the Value+or Value- key.ENABLE *DISABLEOX MODEENABLE *Set A/C zero cross control mode.Press the Value+or Value- key.AUTO *FIXOX TCAUTO *Set TC for timing of heater ON.Press the Value+or Value- key.AUTO *FIXOX TPAUTO *Set TC for timing of heater ON.Press the Value+or Value- key.+7+6+5+4+3+2+10 *-1-2-3-4-5-6-7-8OX ADJUST0 *Select to adjust of A/C zero cross control.Press the Value+or Value- key.ENGINETESTEP TESTOFF *OFF *PAPERCONNECTSets continuous print for run-ning print evaluation at factory.Press the Value+or Value- key.PRT DUTY1/1 *1/11/101/201/50Sets Duty for motor accelera-tion testing at factory.Press the Value+or Value- key.MODE00 *00 *0102˜FDFEFFUsed to start up Soft Logicalanalyze mode, etc. for enginedebug mode.Press the Selectkey.Upon Completionof processingINITIAL-IZINGON LINEXXXUsed in the Engine unit.Press the Select key.ENGINERESETPress theMENU key. Press the ONLINE key.INITIAL-IZINGON LINEXXX+ 2+ 10 *- 1CH V MIN0 * Press the Value+or Value- key.
