Setting your terminal42Defining the local prefix2522 OK - SETUP / NETWORKS / PREFIX / PREFIX SETTING+ Enter the outgoing local prefix of the company’s telephone network(maximum 5 characters) and validate with OK.Transmission reportYou may print a transmission report for all communications over thetelephone network (STN).You may choose between more than one criteria for printing reports:• With: a report is given when the transmission was properly performed orwhen it is completely abandoned (but there is only one report perrequest),• Without : no transmission report, however, your fax will note all transmis-sions that took place in its log (refer to paragraph Logs, page 102),• Always: a report is printed with each transmission,• ON ERROR: a report is printed only if the transmission failed or is abando-ned.With each transmission report from memory, a reduced version of the firstpage is automatically reproduced.To select the report type:231 OK - SETUP / SEND / SEND REPORT+ Select the required option WITH, WITHOUT, ALWAYS or ON ERROR andconfirm your choice with OK.Document feed typeYou may choose the way you want to feed your documents:• from memory, transmission will take place only after memory storage ofthe document and dialing. It allows you to get your originals back quicklyto free up the terminal.• from the feeder of the sheet-feed scanner (refer to paragraph Documentdepositing, page 74), transmission will occur after dialing. It allows trans-mission of larger documents.To select the way you want to feed your documents:232 OK - SETUP / SEND / MEMORY SEND.+ Select the option MEMORY or FEEDER and validate your choice with OK.Remark : in feeder mode, the reduced image will not appear on the transmission report.Economy periodThis function allows you to defer a fax transmission to "off-peak hours" andthus reduce the cost of your communications.The economy period, via the telephone network (at off-peak hours), ispreset by default from 7.00 pm to 7.30 am. Nevertheless you may changethis time slot.
