47Setting your terminalTECHNICAL PARAMETERSAs delivered your fax is preset by default. However, you may adjustit to meet your requirements by resetting the technical parameters.To set the technical parameters:29 OK - SETUP / TECHNICALS+ Select the desired parameter and confirm with OK.+ With the keys or , modify the parameter settings byfollowing the table below and press OK.Parameter Setting Signification1 - SCANNINGMODE1 - NORMAL2 - FINE3 - SFINE4 - PHOTODefault value of the scan mode resolution for thedocuments to be transmitted.2 - TX HEADER 1 - WITH2 - WITHOUTIf this parameter is on, your header will appearon all documents sent to your subscribers withyour name, number, date and number of pages.Note: In the United States, as required byFCC regulations, a heading must beincluded on all FAX messages.3 - TX SPEED 1 - 336002 - 144003 - 120004 - 96005 - 72006 - 48007 - 2400Transmission speed for outgoing documents.For a quality telephone line (compatible, noecho), communications occur at maximumspeed.However, it may be necessary to restrict thetransmission speed for some calls.4 - ECHOPROTECT1 - WITH2 - WITHOUTIf this parameter is on, the on-line echo will bereduced during long distance calls.6 - EPT MODE 1 - WITH2 - WITHOUTFor some long distance calls (satellite), theon-line echo may disturb the call.7 - COM.DISPLAY1 - SPEED2 - PAGENUMBERChoice between transmission speed displayed ornumber of the page in progress.8 - ECO ENERGY 1 - WITHOUT2 - DELAY 5 MIN3 - DELAY15 MIN4 - DELAY30 MIN5 - STDBYPERIODChoosing the printer standby delay: the printerwill switch to standby after a delay (in minutes)of NON-operation or during the period of time ofyour choice.
