Oki B6500 Network Manual

Also see for B6500dn: Configuration guide User manual Brochure & specs Specifications User guide

Oki B6500 Network Manual Manual pdf 29 page image

B6500 Network Guide> 29SETTING UP THE WORKSTATIONThis section explains the settings of Solaris 2.x workstation forprinting.BEFORE SETUPBefore setting up the workstation, check the following:• The setup procedures and commands may vary accordingto different versions of OS. Refer to the manuals thatcame with the workstation for details.• To setup the printer, the user must be a superuser.Contact your network administrator to perform the setupif you do not have the authority of a superuser.• Check the IP address set up for the printer in advance. Becautious as an incorrect IP address may cause severeerrors.• Before performing any network setup (such as the IPaddress) to a host running under NIS (NetworkInformation Service), consult the NIS administrator.EXAMPLES OF SETTINGS FOR SOLARIS 2.XThe examples below show printer settings for Solaris 2.6 where theprinter host name is printer1.1. Registering a printer (printer name: P001) supporting thePostScript language2. Registering a printer (printer name: P002) supporting thePostScript language that feeds paper from an A4-size papertray for duplex printing3. Registering a logical PostScript printer PS01 set using theprinter web page.#lpadmin -p P001 -s printer1\!PS#lpadmin -p P002 -s printer1\!PS A4_DUP#lpadmin -p P003 -s printer1\!PS01