Oki B710dn Setup Manual

Also see for B710: Brochure User guide User guide Maintenance manual Material safety data sheet

Contents

Oki B710dn Setup Manual Manual pdf 8 page image

8 / EnglishLoad paper1. Remove the paper tray from the printer. Place it ona flat surface and remove the lid.2. If the base plate of the paper tray is raised, push itdown.3. Squeeze the length guide and slide it to thedesired paper size (1). Squeeze the right widthguide and slide it to the desired paper size (2).4. Load the paper with the side to be printed facingup and with all four corners aligned.5. Replace the lid of the paper tray and push the traycompletely into the printer.6. Depending on the types and sizes of the loadedpaper, you need to configure settings on thecontrol panel:• Change the paper type when non-plain papersuch as recycled paper, heavyweight paper ortransparencies is loaded.• Configure the paper size when custom sizepaper is loaded unless using Express Print,which is described under “Print Media” in theUser's Guide supplied on the CD furnished withyour printer.CAUTION!Do not place paper over the right width guide.Do not load paper exceeding the maximum fillline or the maximum capacity allowed.Align the right width guide with the paperwidth correctly. If the right width guide is notin place, the paper will not be properly fedand this may cause paper jams.CAUTION!The lid of the tray must be firmly closed. Ifnot, the paper may become misaligned.