C6000n User’s Guide166Check to see if saved Driver Settings areused____________________________You can make changes to the driver settings and save them(under a named driver) for later use. You can do this if you areusing PCL and/or Mac drivers.Before making changes to driver settings, always check to seeif a Named Driver is being used.To do this:1. Open the file you want to print.2. Click File → Print.3. Select your printer.4. Click Properties.5. Click the Setup tab (if necessary).6. Look at the list below Driver Settings. If you see anyname other than Default, a Named Driver is being used.7. If a Named Driver is being used, you canselect “Default” in the list below Driver. This restoredall driver settings to the factory defaults. You can thenproceed with your changes.proceed with your changes and not save them. Use thechanges for only a single print job.proceed with your changes and save them as the sameNamed Driver.proceed with your changes and save them under a newNamed Driver.
