PS FLASH RESIZE 1MB, 0.5MB, 1.5MB, 0MBRECEIVE BUFF SIZESets the size of the receive buffer. The Auto setting calculates the receive buffer size as apercentage of the installed printer memory.RESOURCE SAVESets the size of the font cache area.FLASH INITIALIZECaution! This will erase whatever is presently in the printer's Flash memory.Initializes the printer's Flash memory. This function is normally set by the SystemAdministrator.To perform a Flash Initialization:1. Press MENU repeatedly until MEMORY MENU appears on the display.2. Press ITEM + several times until FLASH INITIALIZE EXECUTE appears on the display.3. Press SELECT.ARE YOU SURE?YES=SELECT/NO=CANCELappears on the display.4. Press SELECT.EXECUTE NOW?YES=SELECT/NO=CANCELappears on the display.5. Press SELECT.PLEASE POWER OFFSHUTDOWN COMPLETEDappears on the display.6. Shut the printer off, then turn it back on again.PS FLASH RESIZECaution! This will erase whatever is presently in the printer's PostScript Flash memory.Changes the size of the printer's PostScript Flash memory area. This function is normally setby the System Administrator.123
