If you create a black oval in MS Paint and leave all the color command filters checked, theblack oval will print as a black rectangle when the overlay is used. To maintain the ovalshape, turn off (deselect) the "Configure Image Data," "Palette Control ID,"and "PaletteControl" filters.c. Click OK.The Open dialog box appears.d. Make sure Print spool files (*.prn) is selected in the File of type drop-down list.e. Browse to the folder where the files are saved and double-click the file name.f. Click OK.The file is saved as a .bin file.g. Repeat steps 1 through 5 until you have converted all the files you wish to add to theProject.4. Add the .bin Files to the Projecta. Click File → Add File to Project.b. Highlight the .bin files you wish to add, then click Open.The file names appear in the Project dialog box.Note: To delete a file from the project, click the file name, then click File → RemoveFile from Project.5. Check the .bin File Settings and Save the Projecta. To check the settings for the bin files, double-click the file name. The Edit ComponentName and ID dialog box appears.b. Here you can edit the• file name• ID number (the number you need to enter in the printer driver when printing overlays)• volume: 0: = printer's disk drive PCL partition 1: = printer's disk drive Commonpartition %disk0%: = printer's disk drive PostScript partition 2: = Flash memory PCL%Flash0% = Flash memory PostScript• path.c. Click OK.d. When you're through reviewing the settings, click File → Save Project.6. Download the Project to the Printera. Click File → Send Project Files to Printer. Command Issued appears.b. Click OK.Downloading a Printer Job Language (.pjl) Command File tothe Printer272
