Replacing consumable items> 65FUSER REPLACEMENTThe fuser is located inside the printer just behind the four imagedrum units.Switch off the printer and allow the fuser to cool for about10 minutes before opening the cover.1. Press the cover release and open the printer’s top coverfully.WARNING!If the printer has recently been powered on, some fusercomponents will be very hot. Handle the fuser with extremecare, holding it only by its handle, which will only be mildlywarm to the touch. A warning label clearly indicates thearea. If in doubt, switch the printer off and wait at least10 minutes for the fuser to cool before opening the printercover.
