Windows> 202. Click the Setting Printer icon. The Setting Printer dialogappears.3. Select “Manual”. In the Details section, you can now editthe IP Address, Subnet Mask and Default GatewayAddress.4. Click OK. The “Admin Password Required” dialog appears.5. Enter the password. The default password is the last 6digits of the MAC Address (upper case).6. Click OK. Allow a few seconds for the changes to save andthe printer to automatically restart before the “SetupCompleted” message box appears.CHANGING THE ADMIN PASSWORDTo change the Admin Password for your printer:1. Select Settings -> Change Password.2. Enter the new password as requested.3. Click OK. Allow a few seconds as the settings are savedand the printer automatically restarts.ENABLE/DISABLE THE PRINTER WEB PAGETo enable/disable access to the Printer Web Page from theNetwork Card Setup utility:1. Select Settings -> Setting Printer.2. Select the “Printer Web Page” tab and select “Printer WebPage - Disable” or “Printer Web Page - Disable”.3. Click OK. The “Admin Password Required” dialog boxappears.4. Enter the admin password as requested and click OK.5. The “Setup Completed” message is displayed.NOTEIf your printer stops at any time, you can restart it byselecting Printer -> Restart Printer in the “Network CardSetup pane”.