Network Userís Guide12Network Configuration usingAdminManagerAdminManager Quick SetupThe AdminManager Quick Setup utility allows you to configurethe network interface easily and simply without installing anysoftware packages.You can configure the following:ï Enable/disable TCP/IP, NetWare, EtherTalk, and NetBEUIprotocols.ï Set IP address, Subnet Mask and Gateway for TCP/IPmanually or by using DHCP.ï Set NetWare mode and create Queue/Print Server/Printerobjects.ï Set the Zone name and Port name for EtherTalk.Configuration requires a PC with Windows XP or Vistaoperating system, running TCP/IP or IPX/SPX (NetWare).This utility can only be used on a PC that can be connected tothe network with TCP/IP or IPX/SPX.This utility must be used on a PC that is located on the samesegment as the printer.NOTENot all utilities, features or protocols aresupported by every product. See the front coverof this manual for a listing of the itemssupported by your product.
