Oki C3600 User Manual

Also see for C3600n: Configuration guide User guide Manual Handy reference Setup guide

Contents

Oki C3600 User Manual Manual pdf 60 page image

Network Userís Guide609. When the settings are correct, click Execute. The newsettings are transmitted to the network interface but itstill operates with pre-transmission settings.10. Click Finish to validate the new settings.11. Switch the printer off for 15 seconds and on again.Now that both Windows and the printer have been configuredto use TCP/IP, the next step is to configure Windows to printto the network printer.NetBEUI Protocol __________________Network Printer SettingsThere are two configurable items under NetBEUI within theprinter. These can be configured using the standard set-uputility described in ìDevice setupî on page 18.Although there are some differences in configuration optionsbetween the various Windows platforms, the procedure forprinting using NetBEUI is the same.Please ensure the NetBEUI protocol has been installed inWindows. This can be confirmed by checking the networksettings. If NetBEUI has not been installed please refer to thesection below.The relevant Windows installation CD may be required and youshould follow the on-screen dialog box prompts.Windows XPAlthough you can install the NetBEUI protocol into WindowsXP, it may not be supported. You should be able to useNetBEUI on LAN connections although you will not be able touse this on a Remote Access Service Connections.1. In the Start menu, select Settings then Control Panel.Computer Name Name assigned to the printerWorkgroup PrintServer11. Although the workgroup name can be changed, it isrecommended that it remains as PrintServer.Comment User definable description