43827101TH Rev.2 154 /Oki Data CONFIDENTIAL5.3.3 Various types of print on the individual printer equipped with controllerMenu Map PrintingInformation on the program versions, controller configuration, network settings, etc., is printed.Operation:1 Press the MENU+ key several times to cause “INFORMATION MENU” to be displayed.2 Press the ENTER key to cause “PRINT MENUMAP/EXECUTE” to be displayed.3 Press the ENTER key.Or, press and hold down for two seconds or longer the push switch above the network connectoron the back of the printer main unit.Demonstration printThe demonstration patterns for different destinations that are built in the ROM are printed.Operation:1 Press the MENU+ key several times to cause “INFORMATION MENU” to be displayed.2 Press the ENTER key.3 Press the MENU+ key several times to cause “DEMO1/EXECUTE” to be displayed.4 Press the ENTER key.5.3.4 Functions of keys when depressed at power-onThe different keys provide the following functions when the power is turned on to the printer. Thefollowing keys turn effective when pressed and held down, until "RAM CHECK" is displayed in theupper line of the LCD, and three to four asterisks "*" in the lower line.(1) MENU+ key & MENU- key & ENTER keyThese keys start the printer in the CU program update mode. When the printer is started in thismode, the network does not work, since the DLM function turns ineffective.(2) BACK key & ONLINE key & CANCEL keyThese keys launch the CU program without activating the objects which were added in thedownload mode, etc.(3) MENU+ key & MENU- keyThese keys launch the system maintenance menu.(4) BACK key & MENU key & ENTER keyThese keys start the printer in the mode in which it remains permanently ONLINE, in disregardof warnings/errors (Factory-support function).(5) ONLINE keyThis key starts the printer in the dedicated mode in which objects, such as network, USB, etc.,are downloaded.(6) ENTER keyThis key launches the Admin menu.
