Oki C5650 User Manual

Also see for C5600: User guide User guide

Contents

Oki C5650 User Manual Manual pdf 12 page image

Paper recommendations> 12PAPER RECOMMENDATIONSYour printer will handle a variety of print media, including a rangeof paper weights and sizes, transparencies and envelopes. Thissection provides general advice on choice of media, and explainshow to use each type.The best performance will be obtained when using standard75~90g/m² paper designed for use in copiers and laser printers.Suitable types are:• Arjo Wiggins Conqueror Colour Solutions 90g/m²;• Colour Copy by Neusiedler.Use of heavily embossed or very rough textured paper is notrecommended.Pre-printed stationery can be used, but the ink must not offsetwhen exposed to the high fuser temperatures used in the printingprocess.Envelopes should be free from twist, curl or other deformations.They should also be of the rectangular flap type, with glue thatremains intact when subjected to hot roll pressure fusing used inthis type of printer. Window envelopes are not suitable.Transparencies should be of the type designed for use incopiers and laser printers. We strongly recommend Oki PrintingSolutions transparencies (Order No. 01074101). In particular,avoid office transparencies designed for use by hand with markerpens. These will melt in the fuser and cause damage.Labels should also be of the type recommended for use incopiers and laser printers, in which the base carrier page isentirely covered by labels. Other types of label stock maydamage the printer due to the labels peeling off during theprinting process. Suitable types are:• Avery White Laser Label types 7162, 7664, 7666 (A4),or 5161 (Letter);