Installing upgrades> 97MEMORY UPGRADEThe basic printer model comes equipped with 64MB of mainmemory. This can be upgraded with an additional memory boardof 64MB or 256MB, giving a maximum total memory capacity of320MB.Installation takes a few minutes, and requires a medium sizecross-head (philips type) screwdriver.1. Switch the printer off and disconnect the AC power cable.2. Press the cover release and open the printer’s top coverfully.3. Lift the front cover latch and pull open the front cover.4. Remove the screw (1) securing the right-hand side cover.WARNING!If the printer has been powered on recently, the fuserwill be hot. This area is clearly labelled. Do not touch.1