Oki C5650 User Manual

Also see for C5600: User guide User guide

Contents

Oki C5650 User Manual Manual pdf 92 page image

Replacing consumable items> 92FUSER REPLACEMENTThe fuser is located inside the printer just behind the four imagedrum units.Switch off the printer and allow the fuser to cool for about10 minutes before opening the cover.1. Press the cover release and open the printer’s top coverfully.2. Identify the fuser handle (1) on the top of the fuser unit.3. Pull the two fuser retaining levers (2) towards the front ofthe printer so that they are fully upright.4. Holding the fuser by its handle (1), lift the fuser straightup and out of the printer. If the fuser is still warm, place iton a flat surface which will not be damaged by heat.WARNING!If the printer has recently been powered on, some fusercomponents will be very hot. Handle the fuser withextreme care, holding it only by its handle, which willonly be mildly warm to the touch. A warning label clearlyindicates the area. If in doubt, switch the printer off andwait at least 10 minutes for the fuser to cool beforeopening the printer cover.CMYK12