Menu functions > 40USB MENUThis menu controls the operation of the printer’s USB datainterface.NETWORK MENUThis menu controls the operation of the printer’s 10Base-T/100Base-TX network interface.ITEM SETTINGS EXPLANATIONUSB ENABLE /DISABLEENABLES / DISABLES the USB port.SOFT RESET ENABLE /DISABLEEnables or disables the SOFT RESETcommand.SPEED 12 / 480 Mps Selects the interface speed.OFFLINERECEIVEENABLE /DISABLEOFFLINE RECEIVE.SERIAL NUMBER ENABLE /DISABLESpecifies whether to ENABLE orDISABLE a USB serial number.The USB serial number is used toidentify the USB device connected toyour PC.NOTEWhen you have changed any settings in the USB MENU, turnthe printer OFF, then ON again.ITEM SETTINGS EXPLANATIONTCP/IP ENABLE /DISABLEEnables or disables this networkprotocol.IP VERSIONIP V4 /IPV 4 & V6IPV 6Sets up the IP version.Operates with IPv4 only (not valid withIPv6).Operates with both IPv4 and IPv6.Operates with IPv6 only (not valid withIPv4).NETBEUI ENABLE /DISABLEEnables or disables this networkprotocol.