C7350 User’s Guide > 108STORE TO HARD DISKNOTE> The internal hard disk must be fitted to the printer andenabled to allow for spooling of the print job before finalprinting.> If the hard disk memory is insufficient for the spooleddata, DISK FULL is displayed and only one copy printed.> If the software application being used has a collate printoption, this must be turned OFF for store to hard disk tooperate correctly.> Store to hard disk may not be available in some softwareapplications.Store to hard disk (job spooling) allows print jobs to betemporarily stored on the hard disk before printing.NOTESince the PCL and PostScript windows for all Windows versionsare similar, only the Windows XP PCL window is shown.On the Job Options tab:In Job Type, select Store to HDD, enter the number ofrequired copies and, if required, check the Collate box.In the pop-up window that appears:1. Enter a job name of up to 16 characters.2. Check if required for each print job to have a name.3. Enter an arbitrary 4-digit personal ID number usingnumeric characters 0 to 9 only.Click OK sufficient times to close the printer dialogue box.4. Print the document from the software application beingused and the document is stored on the hard disk.123
