Oki C7500 V2 Network Manual
Also see for B4400L: User guide
                                                                                                           | |
Contents
| 
Network Configuration 15TCP/IP TabThis allows you to configure TCP/IP related items.Netware TabThis is where you can configure NetWare related items.Location CommentsUse TCP/IPProtocolSet TCP/IP protocol as enabled/disabled.Use DHCP/BOOTPCheck this item if IP address, subnet mask, default gateway and IPaddresses for DNS primary server and secondary servers are retrievedfrom the DHCP or BOOTP server. Otherwise, uncheck.Use RARP Check this item if IP address is retrieved from the RARP server.Otherwise, uncheck.IP Address Set the IP address of the selected network interface card.Subnet Mask Set the subnet mask of the selected network interface card.Default Gateway Set the default gateway of the selected network interface card.Use FTP/LPDBannerCheck this item if you want to add the FTP/LPD banner. Otherwise,uncheck.DNS Server . . . Set IP addresses for DNS primary and secondary servers.Network PnPSetup ...Configure items related to Network PnP.In this dialogue box, the following items can be configured>Auto IP address Set to get IP addressdynamically by Auto IP,enabled or disabledUse Network PnP Set notifying users withusing UPnP supported OSof the printer, enabled ordisabledDevice Name Set the device name forNetwork PnPLocation CommentsUse NetWare Protocol Set NetWare protocol as enabled/disabled.Use IPX Protocol / Use TCP/IPProtocolSet protocol to use. |
Related manuals for Oki B4400L
manualsdatabase
Your AI-powered manual search engine