Oki C7500 V2 Network Manual

Also see for B4400L: User guide

Contents

Oki C7500 V2 Network Manual Manual pdf 80 page image

UNIX 80Operating system configurationThis section explains how to configure a printer for major UNIXoperating systems.Sun OS 4.x.x (BSD) configurationThe following explanation uses Sun OS 4.1.3 and a C7300V2 printeras examples. The absolute path of commands and the configurationmethod may differ between OS versions, so refer to the workstationmanuals for more information.If an incorrect IP Address, Subnet Mask or Gateway is entered, thenetwork may go down or other damage may occur. Check the addresswith the network manager and confirm that the IP address of theprinter has been set.1. Login as [root] to the workstation.If you do not have Superuser rights, the network manager shouldconduct the configuration.2. Register the IP address of the network card and the host namein the /etc/hosts file.Example: for IP address 192.168.20.127 and host name c7300v2192.168.20.127 c7300v23. Use the ping command to confirm connection with the networkcard.Example: for host name c7300v2# ping c7300v2If there is no reply, then there is a problem with the configuration ofthe IP address (the IP address has already been set manually ordynamically) or with the network. Reset the network interface cardsettings to their defaults and then try to set a temporary IP address. If