Oki C7500 V2 Network Manual
Also see for B4400L: User guide
                                                                                                           | |
Contents
| 
Microsoft Windows 50Installation of TCP/IP ProtocolThere are a number of options available when printing using TCP/IPfor Windows. The following table lists the options:1These functions are built into Windows and are displayed as options when using the Add PrinterWizard.Although there are some differences in configuration optionsbetween the various Windows platforms, the procedure for printingusing TCP/IP is the same.1. Ensure that the TCP/IP protocol has been installed in Windows.This can be confirmed by checking the network settings fromwithin the Control Panel. If TCP/IP has not been installed refer tothe section below Installation of TCP/IP protocol.2. If not already configured, a suitable IP address, Subnet Maskand Gateway address should be configured. Please refer to theon-line help if necessary. It is vital that the IP address entered isunique and valid. Entering an incorrect IP address may causesevere network problems. Please check the address with thenetwork administrator.3. If your network environment uses domain names, DNS shouldbe enabled and configured on your system. However, this stepis not essential to enable network printing.4. Restart the operating system.Windows Version MethodWin 95/98/Me Oki LPR UtilityNT 4.0 Oki LPR UtilityMicrosoft LPR1Windows 2000/ Windows XP Oki LPR UtilityMicrosoft LPR1Port 91001IPP1 |
Related manuals for Oki B4400L
manualsdatabase
Your AI-powered manual search engine