- 100 -Changing Network Settings From the Web Page5 5. Network SettingsUsing SNMPv3When you use a SNMP manager that supportsSNMPv3, management of the printer can beencrypted by SNMP.1 Access the printer’s web page and log inas the administrator.2 Select [Admin Setup].3 Select [Network] > [SNMP] >[Settings].4 Follow the on-screen instructions tospecify detailed settings.5 Click [Submit].The network card reboots to enable the newsettings.Using IPv6Your printer supports IPv6. The printer obtainsthe IPv6 address automatically. You cannot setthe IPv6 address manually.The printer supports the following protocols.● For Printing:- LPR- IPP- RAW (Port9100)- FTP● For Configuration:- HTTP- SNMPv1/v3- TelnetOperation is confirmed under specific conditionsfor the following applications.Protocol OS Application ConditionLPD ● Windows 10● Windows 8.1● Windows 8● Windows 7● WindowsVistaLPR(CommandPrompt)*1, 2, 3Port9100 ● Windows 10● Windows 8.1● Windows 8● Windows 7● WindowsVistaLPRng *1, 2, 3FTP ● Windows 10● Windows 8.1● Windows 8● Windows 7● WindowsVistaFTP(CommandPrompt)*1, 2, 3● Mac OS X FTP (Terminal) *1, 2, 3HTTP ● Windows 10● Windows 8.1● Windows 8InternetExplorer 9.0*1, 2, 3● Mac OS X Safari (2.0-v412.2)*1, 2,3, 4Telnet ● Windows 10● Windows 8.1● Windows 8● Windows 7● WindowsVistaTelnet(CommandPrompt)*1, 2, 3● Mac OS X Telnet(Terminal)*1, 2, 3
