- 101 -Changing Network Settings From the Web Page5 5. Network Settings*1) To specify a host name, edit the host’sfile or access via the DNS server.*2) TWith Telnet, when only IPv6 is enabledyou cannot specify a host name by theDNS server.*3) You cannot specify a host name whenyou use a link local address to access.*4) Enter an IPv6 address enclosed withsquare brackets.Note● To use IPv6 on Windows XP, install IPv6.Checking IPv6 AddressThe IPv6 address is automatically assigned.1 Select [View Info].2 Select [Network] > [TCP/IP].Memo● When the global address is displayed only as zeros, it maybe an error due to the router being used.Reference● You can also check the IPv6 address in the network reportfrom the printer by pressing the or button and thenselecting [Print Information] > [Network]. For detailson the report and how to print it, refer to “Printing OutPrint Information” P.58.Using IEEE802.1XYour printer supports IEEE802.1X authentication.Be sure to configure the printer and yourcomputer before performing the following steps.Reference● For details on the initial setup and the IP address, refer tothe User’s Manual (Setup).Configuring Your Printer forIEEE802.1X Using PEAP1 Access the printer’s web page and log inas the administrator.2 Select [Admin Setup].3 Select [Network] > [IEEE802.1X].4 Select [Authenticate Server] and thenclick [Import].5 Enter the file name of the CA certificateand then click [OK].Specify a certificate issued by the certificateauthority from which the RADIUS server obtaineda certificate. A PEM, DER, and PKCS#7 file can beimported.6 Click [Return to Previous Page].7 Select [Enable] for [IEEE802.1X].8 Select [PEAP] for [EAP Type].9 Enter a user name in [EAP User].10 Enter a password in [EAP Password].11 Click [Submit].The network card reboots to enable the newsettings.12 When the standby screen appears on theprinter, turn off the printer.13 Go to “Connecting Your Printer to anAuthentication Switch” P.102.