Oki C813n User Manual

Also see for C813n: User manual

Contents

Oki C813n User Manual Manual pdf 15 page image

- 15 -1 1. Convenient Print FunctionsFor Mac OS X PS Printer Driver1 From the [File] menu, select [PageSetup].2 Select [Envelope*] from [Paper Size].* Select a type of envelope.3 Select orientation from [Orientation]and then click [OK].- Select [Portrait] for side-openingenvelopes, and the check box of [180°]in the [Job Options] function set on the[Printer Features] panel.- Select [Landscape] for top-openingenvelopes.4 From the [File] menu, select [Print].5 Select [Paper Feed] from the panelmenu.6 Select [Multi-Purpose Tray] for [AllPages From].7 Configure other settings if necessary andthen start printing.Memo● If setting details are not displayed in the print dialog box,click [Show Details] at the bottom of the dialog box.For Mac OS X PCL Printer Driver1 From the [File] menu, select [PageSetup].2 Select [Envelope*] from [Paper Size].* Select a type of envelope.3 Select orientation from [Orientation]and then click [OK].- Select [Portrait] for side-openingenvelopes.- Select [Landscape] for top-openingenvelopes.4 From the [File] menu, select [Print].5 Select [Setup] from the panel menu.6 Select [Multipurpose Tray] from[Paper Source].7 Configure other settings if necessary andthen start printing.Memo● If setting details are not displayed in the print dialog box,click [Show Details] at the bottom of the dialog box.Printing on LabelsYou can print on labels by changing the mediatype setting and using the MP tray and thefaceup stacker.Set the paper size and type for MP tray onthe operator panel. Then, make print settingsincluding paper size and paper tray with theprinter driver.Memo● Do not select duplex printing for labels.Reference● For available labels, refer to the User’s Manual (Setup).● Manual printing is also available for printing on labels.For details on manual printing, refer to "Manual Printing"P.19.1 Load paper on the MP tray.Reference● Refer to “Loading Paper” in the User’s Manual(Setup).2 Open the faceup stacker at the rear ofthe printer.Memo● If always printing on labels from the MP tray, registerthe paper on the operator panel. If printing once,proceed to the printing procedures through theprinter driver.3 Press the <Fn> key.4 Press the <9> and <0> on the numerickeypad and then press the <ENTER>button.5 Press the scroll button to select[A4] or [Letter] and then press the<ENTER> button.6 Press the <BACK> button and makesure that [MPTray Config] is displayed.7 Press the scroll button to select[Media Type] and then press the<ENTER> button.8 Press the scroll button to select the[Labels] and then press the <ENTER>button.9 Press the <ON LINE> button to exit themenu mode.10 Open the file you want to print on thecomputer.11 Configure the paper size and tray on theprinter driver.