111 – C910 Appendix B – Menu systemMenus example 1 – Tray 1 transparenciesTo print on transparencies (accommodated in Tray1):1. Ensure that the display panel indicates that the printer isready to print.2. Enter menu mode by pressing either the Up-arrow orDown-arrow button and press them repeatedly until theMenus menu is highlighted.3. Press the Enter button to select this menu.4. Press the Up-arrow or Down-arrow buttons repeatedlyuntil Tray Configuration is highlighted.5. Press the Enter button to select this Item.6. Press the Up-arrow or Down-arrow buttons repeatedlyuntil Tray1 Config is highlighted.7. Press the Enter button to select this Item.8. Press the Up-arrow or Down-arrow buttons repeatedlyuntil MediaType is highlighted.9. Press the Enter button to select this Item.10. Press the Up-arrow or Down-arrow buttons repeatedly tomove through the range of media types until Transparency ishighlighted.11. Press the Enter button to select this value.12. Check that an asterisk (*) appears beside Transparency.13. Press the Online button to exit menu mode and return to theready to print status.DrumCleaningONOFFSet to produce idling of a drumbefore printing in order toreduce horizontal white lines.This shortens image drum life.Hex Dump Execute Prints out the data receivedfrom the host PC inhexadecimal code.Item Value Description