16 – C910 Paper RecommendationsPaper RecommendationsYour printer will handle a variety of print media, including a rangeof paper weights and sizes, transparencies and envelopes. Thissection provides general advice on choice of media, and explainshow to use each type.The best performance will be obtained when using standard weight20 – 24 lb (75 – 90 g/m²) paper designed for use in copiers andlaser printers. Suitable types are:• OKI ® Bright White, 32 lb US Bond• HammerMill ® Laser Print Radiant, White, 24 lb US Bond• Xerox ® 4024, 20 lb US BondUse of heavily embossed or very rough textured paper is notrecommended.Pre-printed stationery can be used, but the ink must not offsetwhen exposed to the high fuser temperatures used in the printingprocess.Envelopes should be free from twist, curl or other deformations.They should also be of the rectangular flap type, with glue thatremains intact when subjected to hot roll pressure fusing used inthis type of printer. Window envelopes are not suitable.Transparencies should be of the type designed for use in copiersand laser printers. In particular, avoid office transparenciesdesigned for use by hand with marker pens. These will melt in thefuser and cause damage.Labels should also be of the type recommended for use in copiersand laser printers, in which the base carrier page is entirelycovered by labels. Other types of label stock may damage theprinter due to the labels peeling off during the printing process.Suitable types are:• Avery White Laser Label types 7162, 7664, 7666 (A4), or 5161(Letter)