35 – C910 Getting StartedChecking Current SettingsCarry out the following steps to generate a Configuration report(Menu Map) to confirm that your printer is correctly configured.1. Ensure that there is Letter paper in Tray 1 (to be used in thisoperation).2. Ensure that the display panel indicates that the printer isready to print.3. Press the Up-arrow or Down-arrow buttons repeatedlyuntil Print Information is highlighted.4. Press the Enter button to select Print Information.5. Press the Up-arrow or Down-arrow buttons repeatedlyuntil Configuration is highlighted.6. Press the Enter button to select Configuration.7. Press the Enter button to execute the command and aConfiguration document is printed.8. After printing the configuration document, the printer returnsto the ready to print status.You can use this document to check your printerconfiguration. System values and installed accessories arelisted at the top of the first page while status values andsettings follow.Interfaces and ConnectionYour printer is equipped with a selection of data interfaces:• Parallel – For direct connection to a PC. This port requires a bi-directional (IEEE 1284 compliant) parallel cable.• USB – This port requires a cable conforming to USB version 2.0 orabove.The printer may not work if a USB- compatible device isconnected concurrently with other USB-compatible machines.When connecting multiple printers of the same type, theyappear as *****, ***** (2), ***** (3), etc. These numbersdepend on the order of connecting or turning on each printer.• Ethernet – For network cable connection.